My account

V-TEC feed roller for John Deere 758 Danfoss harvester heads

V-TEC feed roller for John Deere 758 Danfoss harvester heads

V-TEC feed wheel John Deere 758 Danfoss

Product price

938,39 €

Price including VAT 24% is 1 163,60 €

A V-TEC steel feed wheel for John Deere 758 harvester heads with Danfoss tightening.

Technical specifications
Measurements462x462x130 mm
Mounting8 bolts
Weight27.5 kg
Left and right wheel identical
Product codeVTJD-758-Da
Spare part codeF055959, F055961

High quality V-TEC feed wheel designed with customer feedback in mind and it's structure is patented.

Availability
In stock

Uniquely designed and listening to user feedback

Development work by MenSe Oy on the durable V-TEC feed wheel John Deere 758 Danfoss was accomplished by listening to feed roller users and grab designers. The development work has resulted in a new solution, the V-Tec roller, which has even better grip and is cleaner. At the same time, damage to the wood surface is reduced.

v-tec feed wheels excellent grip
V-TEC Feed wheels excellent grip

What are V-TEC feed wheel John Deere 758 Danfoss benefits?

The gripping surface machined onto the diagonal shank in the direction of the axle forms a circular outer sphere, which feeds timber evenly. Cutting length is achieved faster, the operation becomes more effective, improving profitability. The spikes on the diagonal shank provide sturdy support for the timber. The rollers provide excellent grip in both feeding directions, backwards and forwards. The grip also minimizes surface damage. Gripping pressure may be lowered, which also provides savings in fuel costs. Uniquely designed V-TEC feed wheel John Deere 758 Danfoss has an open, light and non-clogging structure. The rollers are made of hard, abrasion resistant steel but still it's weight is only 27.5 kg.

v-tec feed wheels in harvester head
V-TEC Feed Wheels in harvester head

Cost-effective and long-lasting feed rollers

MenSe feed wheels are for You who appreciates long lifetime with low costs and financial benefit enabled by increased uptime. The warranty period covers 2000 working hours or 1 year.

Comparing the V-TEC to standard feed wheels and showcasing it's unique capabilities.

What users say

Jani Taskinen comment about v-tec

Ponsse H6/H7/H8 Multi-tree V-TEC

"I've many work sites where we harvest simultaneously energy- and material trees.

V-TEC multi-tree works great on both types. Work would be very inefficient, if you had to changes feed wheels on every different tree type.

Comparing the V-TEC to other feed wheels what i've used, it's GRIP is amazing on normal pressures. You can't get it to slide. Lack of boron in Northern Savo pine trees causes them to have very lush branches, especially their tops are difficult to handle. I lost my nerve with standard feed wheels, because they clog up. V-TEC grip is always firm and it doesn't clog. At first i was afraid that V-TEC's sharp rib would damage the tree trunk. Rib marks were measured, they won't cause any harm. Contact area is large on the tree trunk so it doesn't leave any marks. Tree isn't a log if V-TEC does damage to it."

Jani Taskinen

Metsätyö Taskinen Oy

P. Mikkonen Oy comment about v-tec

Ponsse H6/H7/H8 V-TEC

"You get more out of your harvester head with these feed wheels. Excellent grip. Bark passes through between the ribs and grip stays. Handling of the tree tops and birch became easier. Biggest difference that i noticed compared to other feed wheels is these are better with bigger logs and birch. I'll buy these again."

Metsäkoneurakointi P. Mikkonen Oy

Eero Santajoki comment about v-tec

Ponsse H6/H7/H8 V-TEC

"Amazing grip. Most obvious difference to previous feed wheels that tree tops comes through intact. Feeds well backwards and forwards. Calibration is easy when tree trunk's surface is smooth compared to standard feed wheels."

Eero Santajoki

Reijo Pulkkinen comment about v-tec

Ponsse H6/H7/H8 V-TEC

"Most amazing! You can lower gripping pressures considerably, from 90 to 70. Feeding speeds increased. Finds measures instantaneously. Only small dots on tree trunk = doesn't break the bark. I liked!! Not noisy. Goes through more smoothly than previous standard feed wheels. It's stupid to save money on the feed wheels. Money well spent."

Reijo Pulkkinen

Pulkkinen Forest Oy

Jocke Larsson comment about v-tec

John Deere H413 V-TEC

"You've really succeeded with V-TEC feed wheels. Multi-tree work flawlessly and tree goes through more smoothly than rubber wheels. We're very happy with the result!"

Jocke Larsson

Per-Hans Skogsentreprenad AB

Jussi Niemi comment about v-tec

John Deere H413 V-TEC

"Excelent grip. Doesn't damage the tree trunk. Very durable, almost 8000h used. Holds well in both directions, forwards or backwards. Ribs placed in interlaced order. At the begining it's tips get rounder but doesn't seem to affect performance. Doesn't clog. Gripping pressure is lower than on standard feed wheels. DOESN'T SHAKE."

Jussi Niemi

Koneurakointi J. Niemi Oy

Article about feed wheels (Koneviesti 16/2017)

The properties of the V-TEC roller are described in Koneviesti magazine (no. 16/2017). Read the article by clicking the image below.

v-tec article koneviesti
Feed wheel reconditioning

Reconditioning feed wheel service is effortless which brings even more operating hours to the used feed wheels. Reconditioning is done swiftly and with high quality standards.

Factory reconditioned feed wheels

Searching for used feed wheels? Please check out our factory reconditioned feed wheel offers.

Mense Oy has manufactured feed wheels since 1994

Recommended categories

Hand selected product categories what you should check out.

Found what you're looking for?

Categories

About us

My account

Your shopping cart is empty

This web site uses cookies for enhanced functionality. By continuing to use this service you consent to use of cookies. About cookies

I accept cookies

Change language

Change currency